47mm x 75mm Sawn Treated Timber (3″ x 2″) 3.6m

What is 3×2 Timber 3.6m?

Experience the versatility and convenience of 3.6m 47mm x 75mm (3 x 2) timber for all your construction needs. Also known as 47×75 timber, 3 x 2 timber is the perfect choice for framing your next project.

With its suitability for both indoor and outdoor applications such as roofing, flooring, and wall applications, 3.6m 3×2 timber offers numerous benefits. It provides protection against the elements, ensuring durability, longevity, and minimal maintenance requirements.

At Trade Timber, we supply responsibly sourced timber that is sawn to the required length and pressure-treated to prevent fungal and insect attacks. We offer 3 x 2 stud timber in various lengths which can be trimmed to your project’s specific length requirements.

Please note that the finished size of our carcassing timber may vary slightly from the nominal dimensions. You can expect to receive timber that is finished with a thickness 2mm less and a width 5mm less than the nominal measurements stated. Color and finish may slightly vary as this is a natural product.

47mm x 75mm 3×2 Timber 3.6m Applications

At Trade Timber, all our timber available for online purchase is treated with preservatives, kiln dried, and planed all around to provide eased edges for easier handling.

In the construction industry, pressure-treated timber is highly regarded for its many benefits, including protection against the elements. Thanks to its treatment, 47×75 timber is suitable for various indoor and outdoor applications, such as roofing, flooring, and wall applications.

3 x 2 timber lengths are commonly used in stud wall partitions, where they serve as both the horizontal and vertical sections of the wall.

Some examples of how 47×75 timber can be used include:

• Roof and flooring joists
• Building structure’s timber frame
• Outdoor decking (due to its durability and moisture resistance)
• Outdoor frames and pergolas
• Fencing
• Garden sheds and garden furniture

Please note that 3 x 2 timber is considered non-structural, meaning it should not be relied upon to support the building structure.

What is 3×2 Timber In mm?

While 3 x 2 timber is typically measured in inches as an imperial measurement, it is sometimes also measured in metric units, specifically millimeters (mm).

3×2 timber is considered to be either 50x75mm or 47x75mm, depending on the cutting and preparation process.

On our website, we sell timber with dimensions of 75mm x 47mm. The difference in actual size is minimal and will not significantly impact your project.

Pressure Treated Timber Benefits

The purpose of pressure treating wood is to infuse preservative chemicals deep into the cellular structure of the timber.

Pressure-treated timber offers several benefits, including:

• Longevity
• Weatherproofing
• Cost-efficiency
• Fungal resistance
• Insect resistance
• Low maintenance requirements

Is It Easy To Cut 47×75 Timber to a Preferred Size?

Treated wood can be easily cut to the dimensions required for your project. However, it is important to use appropriate equipment, wear eye protection, and use a respirator. Cutting treated wood releases small airborne particles of wood, which may contain the chemicals used in pressure treatment.

Treated wood has a consistency similar to wet wood when cutting, so extra care should be taken to ensure the blade does not slip.

If you require longer lengths or have specific size requirements, feel free to contact our friendly team as we may be able to provide additional options.

Please note that this information is provided as a general guide, and it is recommended to consult professionals and adhere to specific guidelines for your project’s requirements.